LOW-LEVEL ORDER PICKER

5 Common Forklift Problems and Fixes

No matter how rugged and robust forklift trucks are, without a properly trained and experienced operator they may result to operation failure. Improper maintenance practices, unprofessional handling & operation, or lack of knowledge about the vehicle can often lead to problems.

A forklift truck may encounter issues which if left unaddressed can lead to malfunctioning or complete failure. So it is vital to spot, understand, and fix potential issues early.

Here are the 5 most common forklift problems and how to fix them:

1.  Issues with Ignition

The health of a diesel forklift engine depends on various factors. If you are unable to start the vehicle it does not necessarily mean that it needs major repairs, it can also be something easily fixable. In such a case taking a look into the following can help:

  • Check the fuel level for Diesel forklift
  • Incase of Electric forklift, take a look at the battery condition and make sure that the battery is charged.
  • Diesel forklift engines tend to overheat. Check oil and coolant levels and make sure that you have an adequate amount of both.

If there are no problems with the power, oil, or coolant levels, it is advised to call professional help for your Linde Forklift. Keeping a service book with the maintenance history of the machine always comes in handy.

2.  Issues with Engine Heating

An overheated engine can cause the diesel forklift to shut down. Excessive heat also burns the engine oil faster which may lead to the forklift being non-operational. So it’s important to take a look at the following regularly:

  • Keep a check on the coolant system. Ensure that it is active. Check for the coolant levels.
  • Check for blockages and gently clean the machinery if required.

Apart from these, if you own a Linde forklift, it is also advised get in touch with Linde Service Official so that the problem may identified immediately and solution can be provided.

3.  Issues with Steering

Having an issue with your steering is very dangerous, it makes the forklift truck prone to errors and in turn, accidents. Consider the following factors to avoid such incidents:

  • Check steering fluid transmission. A poor flow can affect the ability to switch directions.
  • Check wheel alignment.
  • Check the condition of the gears of the steering assembly. Worn-out gears or a rusty steering mechanism can also cause issues with the steering.

Damaged or worn-out parts should be replaced with genuine spare parts to prolong the life of the machine. Contact your nearest Linde Forklift dealer for regular checkups.

4.  Issues with the Mast

Problems with the mast or the lift mechanism of the forklift may arise. To reduce the risks of damaging the goods it is important to resolve the issue straight away.

Contact your service officer, incase you own a Linde forklift, get in touch with your nearest dealer personnel.

5.  Issues with tyres and suspension

Due to the heavy loading and unloading involved with forklifts, the tyres are bound to take a toll. Worn-out tyres affect the forklift’s performance and can lead to problems with driving, stability, and safety. The operator should always inspect the tyres before using the forklift truck and suggest a replacement when necessary.

Share this: