Electric Pallet Stacker (1.4 – 2Ton)

Steering system & Tiller
- Electric power steering as standard ensures effortless driving
- Twin grip steering control, operable with either hand for easy handling
- Easy-to-reach control buttons permit fingertip operation for utmost efficiency
- Wrap-around hand protection
AP platform
- Platform concept:- One piece platform with tiller and side guards
- Cushioned platform reduces shocks & vibration for the operator
- Whole Body Vibration is only 0.68m/s^²
- Folding side guards allow pedestrian use
Linde Weighing Device
- Weight estimation of the load carried up to 1500 mm
- Information available at a glance on a wide multifunctional display
- System accurancy +/- 50 kg
Multifunctional Display
- Important information about truck and the load
- Easy and ergonomic navigation within the different settings and information tabs
- Provides hourmeter, battery status and maintenance information
AC motor
- Powerful, high-torque 2,3 kW AC drive motor
- Moisture and dust-proof AC motor
- No rollback when starting on a slope
- Traction speed adjustable up to 10km/h in platform mode, laden or unladen
Lifting System
- OptiLift® mast control provides precise, fully proportional lifting
- Soft landing of the forks protects the load when lowering
- Initial lift version provides improved clearance on ramps and dock levellers
- Wide range of mast options available to suit any application
Brakes
- Automatic braking on release of traction butterfly or selecting the opposite direction
- Truck slows before coming to a stop, remaining under total control at all times
- Highly efficient electromagnetic brake applied by moving the tiller to fully up or down position
- Easy-to-reach emergency isolator on the top of the front cover
Battery change
- Vertical battery change as standard
- Lateral change option includes:
- Rollers inside the battery compartment to aid battery change
- Lever initiates battery change preventing direct contact

Standard Equipment

Sinergo®, the operator / truck interface:
Comfortable operator compartment with fully suspended AP platform
Power assisted steering
Creep speed control
Linde Safety-Lift
End-of-stroke resistance
Dedicated work station (with storage compartments)
OptiLift® proportional lift system on the tiller head
Mast protection (polycarbonate or steel mesh)
Multifunction coloured display as well as hourmeter, maintenance indication, battery discharge indicator and internal fault code indication
Weighing device information from the ground up to 1500 mm with +/- 50 kg accurancy
Folding stand-on platform with side guards
2,3 kW AC motor (maintenance free)
Positive steering (drive wheel) feedback
Automatic speed reduction when cornering
Electromagnetic emergency brake
Key switch or LFMgo (PIN-code access)
CAN bus technology
Vertical battery change 2 PzS or 3 PzS
(3 PzS on the 2 t version)
Cushion drive wheel
Polyurethane single load wheels
Double castor wheel
Width over fork carriage: 560 mm, 680 mm (1.4 t and 1.6 t versions) or 580 mm (2 t version)
Fork carriage length / thickness:
1150 mm/71 mm or 55 mm (preferred while using gitter box), 1150 mm/73 mm on the 2 t version
Protection -10°^C

Optional Equipment

Initial lift
Ultra fast lifting (up to +40%)
Drive wheels: polyurethane, wet grip, cushion with tread, polyurethane with tread or non marking
Load wheels: tandem polyurethane, tandem polyurethane gresable
Soft landing of forks (free of charge)
Load backrests
Lateral battery change 3 PzS or 4 PzS (1.4 t and 1.6 t versions)
Standard, Duplex or Triplex masts (mast up to 5316 mm)
Alternative fork carriage length / thickness:
950 mm/71 mm or 55 mm (preferred while using gitter box), 950 mm/73 mm on 2 t version
Linde Connected Solutions:
ac:acces control, an:usage analysis, dt:crash detection
Pack Clipboard
Mobile or Fixed battery stand (for lateral battery change)
Automatic battery watering system
Built-in charger
Cold store protection -35°^C